Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2013
    Location
    MN
    Posts
    120

    Default Quick question on pump location

    I assume my pumps are behind the false wall. Is there a trick to removing the wall. I do not see any fasteners or screws holding it in place and didn't want to jus yank on it.

    Thanks
    2011 Mobius LSV, V2 Tower, 1100lbs regular side,
    750lbs goofy, 370lbs ski locker, 750lbs bow,
    flow surf (don't use it thanks to suck gate)

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    should be 2 screws on the locker floor that are mounted through an "L" bracket. Remove those and pull out from the bottom of the panel. There is a Z clip at the top of the panel that locks in behind the fiberglass lip of the lockers.

  3. #3
    Join Date
    Aug 2013
    Location
    MN
    Posts
    120

    Default

    That worked. Thanks Drew
    2011 Mobius LSV, V2 Tower, 1100lbs regular side,
    750lbs goofy, 370lbs ski locker, 750lbs bow,
    flow surf (don't use it thanks to suck gate)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •