Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Jun 2014
    Location
    Gardendale, AL 35071
    Posts
    6

    Default Wanted 13.7 x 17.5 4 blade prop

    I am interested in buying a 13.7 X 17.5 4 blade prop the OJ # is 456. It will need to fit a 1994 MasterCraft Maristar 225VRS, LT1

    Thanks

  2. #2
    Join Date
    May 2014
    Location
    Clermont, Fl
    Posts
    586

    Default

    I do have an OJ Fusion Edge prop that I can't use on my boat (too large of a diameter).

    I'll report back with the size later this evening.

    e

  3. #3
    Join Date
    May 2014
    Location
    Clermont, Fl
    Posts
    586

    Default

    prop I have is the OJ XMP Fusion Edge #532 (I think it is 532)
    14.25 x 14.5

    1 /8" shaft
    Last edited by slipperyrockTKE300; 06-18-2014 at 06:31 PM.

  4. #4
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    598

    Default

    The 456 fits a splined shaft which is unique to MC. I have a 13.7 x 17.5 in perfect condition but won't work for your boat.
    2005 Mobius LSV
    325 EFI

  5. #5
    Join Date
    Jun 2014
    Location
    Gardendale, AL 35071
    Posts
    6

    Default

    I am trying to edit my post but have not found where to do it.
    The OJ # 456 for the prop to fit my boat is not correct.
    My boat is 1 1/8" shaft keyed not splined.

  6. #6
    Join Date
    Jun 2014
    Location
    Gardendale, AL 35071
    Posts
    6

    Default

    I think your prop probably will fit my boat. I was incorrect about the OJ 456 fitting. My prop would need to be 1 1/8" shaft keyed.

  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    I'm pretty sure this is the one I have in a box on my shelf:

    http://www.wakemakers.com/oj-456-propeller.html

    Edit: Yup. Just checked. That's the one. Great prop but I went to the ACME 1161.
    Last edited by kaneboats; 06-19-2014 at 08:17 AM.
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,020

    Default

    if Kane doesn't have one for ya, I believe my spare is what you need. it was dinged lightly a few years ago, had it professionally repaired/balanced and has not seen the water since.
    pm if he doesn't hook ya up.
    would give me the opportunity to buy a more appropriate spare for my boat. the 13x17 is wrong size.
    Last edited by sandm; 06-19-2014 at 08:25 AM.
    '06 Supra Launch 20SSV-gone but never forgotten

  9. #9
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    598

    Default

    13.7 x 17.5 for 1-1/8" taper keyed shaft would be an OJ 454. Looks like several people here have a spare they would be willing to part with. That was the standard prop on Moombas in the past and most people upgraded to handle extra ballast. PM me with an offer. Mine is in the box collecting dust.
    2005 Mobius LSV
    325 EFI

  10. #10
    Join Date
    May 2014
    Location
    Clermont, Fl
    Posts
    586

    Default

    the one I have - I believe has never been used and if it was it was it was on a LXV for only about 20 minutes.

    Not enough clearance between prop and trailer to use on my boat.

    I'm really not sure what model number it is, but was told by an OJ Rep that it was an XMP Fusion Edge.

    The shaft size should read 1 - 1/8".

    If anybody wants it, send me a PM. Willing to trade prop for new backpacking tent.
    Last edited by slipperyrockTKE300; 06-19-2014 at 10:08 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •