Results 1 to 9 of 9
-
06-10-2014, 08:30 PM #1
Couple of board racks I picked up at a garage sale...
I didn't really need them but I just couldn't pass on them for $75 for both as I figured someone on the forum might be looking some. I will let them go for what I paid -- $75 for the set or $40 each plus actual shipping charges.
One is definitely for wakeboards but the other could work for surf boards (2 1/4" slots) depending on the size of your board. Then even include an "alternate" backing plate that may be desired for a different look.
The only downside -- they do NOT have a mounting bracket so you would have to find that somewhere else.
Check out the pics and let me know if anyone is interested.
Here is the bigger one:
IMG_0873.jpg
And the smaller one for wakeboards only:
IMG_0874.jpg
Alternate backing plate that would be included with BOTH racks:
IMG_0875.jpg
Here is the bolt pattern on the back so it looks like it would fit quite a range of mounting brackets:
IMG_0876.jpg
*** Almost forgot the best part -- the brand name on them is "Nice Rack"!! Let the jokes begin...Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-11-2014, 01:05 PM #2
What clamps would I need for a rad a cage tower? Does anybody make them?
2006 Outback V
1992 Ski Nautique Open Bow
-
06-11-2014, 01:30 PM #3
It would depend on the size of your tower, but it looks like these two sources have clamps to support from 1 1/4" - 2 1/2". I just did a quick Google search, you may be able to find others that are cheaper.
http://www.diywake.com/store/board-rack-clamp
http://www.bulletlines.com/ProductDe...7c4216_a_7c792Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-11-2014, 03:42 PM #4
I have the 1x2 crossbars so it's a little different
2006 Outback V
1992 Ski Nautique Open Bow
-
06-11-2014, 03:53 PM #5
Ah yes, that would take a special bracket of some kind (not sure where you would get that) or you could just mount it directly on the tower.
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-11-2014, 11:47 PM #6
What's the spacing of the bolt where the rack mounts to the plate? I'm wondering if I could use old mounts and mount up the new forks.
2006 Outback V
1992 Ski Nautique Open Bow
-
06-12-2014, 09:23 AM #7
Couple of board racks I picked up at a garage sale...
The larger rack has four mounting holes (see pic) and the smaller one has just two holes that are exactly 1" center to center
ImageUploadedByTapatalk1402579361.208846.jpgMike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-17-2014, 01:49 PM #8
Bump......any takers before I head over to ebay?
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
06-17-2014, 06:41 PM #9
Sold!!!!!!
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...