Results 1 to 7 of 7
Thread: 07 LSV diagnostics port
-
03-05-2015, 05:00 PM #1Junior Member
- Join Date
- Apr 2014
- Posts
- 12
07 LSV diagnostics port
Ok so Ive had this 07 LSV for over a year now, Ive only been out on the water maybe 5 times, but probably 40-50 starts and stops, the check engine light has been on since the first time i got it out on the water. I thought it was because it had a new battery but after the 20th or so start, I'm not sure that's the case. I cannot locate the diagnostics port so i can scan codes.... does anyone have any idea?? thank you.
-
03-05-2015, 05:23 PM #2
On the back of the engine is the computer, it has a port, I don't know if its a classic OBDII like a car has.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-05-2015, 05:28 PM #3
I'm pretty sure its not an OBDII port. Requires software.
2016 Moomba Mojo
2006 Supra 24SSV - Traded
-
03-05-2015, 05:31 PM #4Junior Member
- Join Date
- Apr 2014
- Posts
- 12
i believe its MEFI-5 correct? does anyone know if it is the flat 6 port or the obd2 style?
-
03-07-2015, 01:05 PM #5Senior Member
- Join Date
- Aug 2006
- Location
- Millington TN
- Posts
- 204
-
03-11-2015, 02:24 PM #6Junior Member
- Join Date
- Apr 2014
- Posts
- 12
quick question, should i have a plug with a looped wire plugged in to the DLC? like this here
Last edited by 562uned; 03-11-2015 at 02:28 PM.
-
03-11-2015, 02:30 PM #7Junior Member
- Join Date
- Apr 2014
- Posts
- 12
quick question, should i have a connector like this plugged int o my dlc? its there and im not sure its supposed to be...