Results 1 to 8 of 8
Thread: Swim platform pin fell out
-
06-09-2014, 10:37 PM #1Senior Member
- Join Date
- May 2014
- Location
- Hoover, Al
- Posts
- 588
Swim platform pin fell out
Discovered Sunday after trail wring the boat that I lost the port side pin that holds the swim platform on. Anyone else experience this?
2012 Mojo
2012 Mojo
-
06-09-2014, 11:04 PM #2
-
06-10-2014, 02:47 AM #3
I lost one last year while on the water. I also replaced with bolts at that time
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-10-2014, 07:22 AM #4
Yes, replace the pins with stainless steel bolts and nylon lock nuts. If you've not done so already, you can also replace those set screws with SS bolts.
2022 Moomba Mojo
2013 Moomba Mojo 2.5 (sold)
Tow - 2019 Ford F150 Ecoboost
-
06-10-2014, 01:33 PM #5Senior Member
- Join Date
- May 2014
- Location
- Hoover, Al
- Posts
- 588
Swim platform pin fell out
Thanks guys! Will do all Thursday.
2012 Mojo
-
06-10-2014, 04:02 PM #6Senior Member
- Join Date
- May 2014
- Location
- Hoover, Al
- Posts
- 588
Swim platform pin fell out
Uni,
Remember what size you used?
2012 Mojo
-
06-10-2014, 07:39 PM #7
Swim platform pin fell out
1/4" - 20 will fit in the set screw holes. I used a jam nut to retain the torque. I actually opted to open up the 2 two spring holes to 5/16" since they were no longer tight at 1/4".
So far it's held up to a 3 day weekend full of surfing.
Sent from my iPhone using Tapatalk2022 Moomba Mojo
2013 Moomba Mojo 2.5 (sold)
Tow - 2019 Ford F150 Ecoboost
-
06-13-2014, 02:05 PM #8Senior Member
- Join Date
- May 2014
- Location
- Hoover, Al
- Posts
- 588
Swim platform pin fell out
Got it all wrapped up on Thursday. Will be at Lake Martin all from fri-Monday testing it out!
Thanks guys!
2012 Mojo