Results 1 to 8 of 8
Thread: Engine Timing
-
06-11-2014, 07:27 PM #1Junior Member
- Join Date
- Jul 2012
- Location
- Little Rock, Arkansas
- Posts
- 27
Engine Timing
Hey guys, just installed a new engine in my 02 mobius lsv and need to do the timing on it. I have the distributor jumper plug but every time we try to swap the harness plug for the jumper plug to advance the timing it dies out. Anyone know if I am even doing this right or should I do this a different way? We try to swap the plugs when its at idle. Thanks!
Goose
-2002 Mobius LSV 350 indmar assault FI
-
06-11-2014, 09:34 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Engine Timing
Haven't done it but does it die even when you increase the idle? You need to have the plug in first I believe, if you unplug it it'll probably kill it..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-11-2014, 09:48 PM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Engine Timing
http://www.wakeworld.com/forum/showthread.php?t=779348
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-11-2014, 10:39 PM #4Junior Member
- Join Date
- Jul 2012
- Location
- Little Rock, Arkansas
- Posts
- 27
parrothd- we have not tried to swap the plugs any higher than idle, but it does kill it when we swap the plugs at idle. we tried starting it with the shunt installed but it wont start. it'll crank just not start. i did notice in that forum you posted on here that the loose wire needs to be connected to 12v so i will try that next for sure. the only thing is my engine is injected not carb'd.
Goose
-2002 Mobius LSV 350 indmar assault FI
-
06-11-2014, 10:41 PM #5Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Engine Timing
That's different, you need the manual..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-11-2014, 10:51 PM #6Junior Member
- Join Date
- Jul 2012
- Location
- Little Rock, Arkansas
- Posts
- 27
ive been searching for a service manual but can only find the operator manual which is of no help. any idea of where i can find one? preferably online. thanks
Goose
-2002 Mobius LSV 350 indmar assault FI
-
06-11-2014, 11:18 PM #7Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Engine Timing
Email [email protected]
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-13-2014, 09:55 PM #8
Engine Timing
You should reach out to Engine Nut on this forum he is the Indmar Guru. On the Carb motor the connector needs direct 12 volts during timing adjustments.
CS