Results 1 to 5 of 5
Thread: Flame Arrestor Removal
-
06-06-2014, 10:17 PM #1Junior Member
- Join Date
- May 2013
- Posts
- 7
Flame Arrestor Removal
Trying to remove the flame arrestor on a 2008 Outback (fuel injection) and cannot get it off. We have loosened the clamp at the base but will not lift off.
Feel like a jerk but do not want force anything and brake something. What am I missing???
Thanks...
-
06-07-2014, 08:47 AM #2
-
06-07-2014, 11:54 AM #3
Get a rubber mallet and tap it from the bottom, working your way around. Or use a folded towel and a wrench, the Red Neck way LOL
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
06-07-2014, 04:52 PM #4
Mine was a pain in the butt to get off. I seriously though I was going to break it. Keep at it back and forth, it will come.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
06-08-2014, 10:02 AM #5
Same here. May want to spray some lube in the relief cuts and then a lot of wiggling and baby taps with a rubber mallet.
2008 Mobius LSV
1100#er's in the lockers
ski locker sac
IBS
Johnson reversibles
3 vent heater (which my family loves)