Results 1 to 10 of 13

Hybrid View

  1. #1
    Join Date
    Apr 2014
    Location
    Owensboro, KY
    Posts
    204

    Default Depth Finder Transducer

    What expoxy are you guys using? Mine is showing --- while underway so I am assuming the expoxy has gone bad?

    Thanks,

  2. #2
    Join Date
    Jul 2013
    Location
    Cedar Falls, IA
    Posts
    700

    Default Depth Finder Transducer

    Mine is doing this from time to time as well... Usually just power down and power up and it works... Guess I ought to see how well it's attached.


    Sent from my iPhone using Tapatalk
    2022 Moomba Mojo
    2013 Moomba Mojo 2.5 (sold)

    Tow - 2019 Ford F150 Ecoboost

  3. #3
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,786

    Default

    I am having the same issue but have not looked into it yet. There is another Thread on this subject.

    https://forum.moomba.com/showthread....unting-In-Hull
    2008 Outback V - Sold but never forgotten.
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  4. #4
    Join Date
    Sep 2013
    Location
    Bennett, N.C.
    Posts
    67

    Default

    Mine started that and a friends did it this year had to replace the depth finder I think the factory ones are known for this.
    2004 Mobius LSV 340 HP
    Gravity III Ballast
    750s in Rear
    Stock 400 in Front

  5. #5
    Join Date
    Jul 2013
    Location
    North Mississippi
    Posts
    217

    Default

    I'm getting the occasional "----" as well. I didn't realize the factory ones are known for this. Do I only need to replace the transducer? Is it plug and play with current gauge and wiring?
    2008 Mobius LSV
    1100#er's in the lockers
    ski locker sac
    IBS
    Johnson reversibles
    3 vent heater (which my family loves)

  6. #6
    Join Date
    May 2013
    Location
    Vancouver WA
    Posts
    5,018

    Default

    are yours thru hull or in hull? Mine is in hull (no cut) and I have to fill mine with mineral oil. I think I must have a small leak somewhere that is allowing the oil to seep out, as I'll get --- or some whack readings and once I top off the mineral oil it works great.
    2008 Moomba Mobius XLV. Monster Cargo Bimini, WS Rev 410's, Polk Cabins, 3 Infinity Subs, PPI amps, WS420, Exile BT, upgraded ballast pumps, up to 3,500+ pounds of ballast, Blue LED's...
    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.
    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2009 Audic A6 Avant 3.0T, 2005 Kawasaki ZX-6R 636.
    www.TraysonsToybox.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •