Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2014
    Posts
    2

    Default Gravity III ballast bow pump not turning on

    Where are the fuses for the ballast pumps on a 2012 Mojo, the bow pump is not turning on,I'm not sure if it ever has, rear pumps work fine.

  2. #2
    Join Date
    May 2013
    Location
    Gainesville, GA
    Posts
    140

    Default

    I had the same problem early this season. After using a voltmeter to determine i had power to the pump, I gave the pump a couple of taps with a large screw driver and it worked. It doesn't take much resistance to keep a low amperage pump from spinning. The top three are 1) sticking impeller, 2) sticking coil, 3) stuck brush.
    -Blaine

    2019 Makai
    2013 LSV (sold)
    1997 Bayliner 1850 (sold)

  3. #3
    Join Date
    Jul 2014
    Posts
    2

    Default

    Quote Originally Posted by The_Robo_Fighter View Post
    I had the same problem early this season. After using a voltmeter to determine i had power to the pump, I gave the pump a couple of taps with a large screw driver and it worked. It doesn't take much resistance to keep a low amperage pump from spinning. The top three are 1) sticking impeller, 2) sticking coil, 3) stuck brush.
    Thanks I'll look into that, I'm thinking it is the fuse or an electrical issue since neither the fill or drain pump for the bow ballast are coming on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •