Results 1 to 10 of 18
Thread: Depth Sounder- no display
-
04-28-2014, 02:36 PM #1
Depth Sounder- no display
So recently got back on the water, everything is working great but my depth sounder. I have no display to it, so i am assuming that there is no power getting to it? Has anybody have had simimilar issues?
It worked fine last year... I did a search on here for similar issues, not seeing anything like mine yet.
Thanks!B.J. Reed
2006 Moomba OBV
-
04-28-2014, 02:48 PM #2
Does it have this in the display --- or nothing at all?
2007 Moomba Outback V
2015 F-250 PSD CC
2012 Fuse 40 T-bar
Sky Ski Le-38
XXX front wing
UFO rear wing
Evo tower
-
04-28-2014, 02:51 PM #3
nothing at all... I read if it was the --- then re-epoxy the transducer. not getting anything at all...
B.J. Reed
2006 Moomba OBV
-
04-28-2014, 06:41 PM #4Senior Member
- Join Date
- Aug 2013
- Location
- Richmond, VA
- Posts
- 159
Depth Sounder- no display
I have a spare one if you determine gauge is bad I would send your way if you could cover shipping. I thought mine was bad and had the factory send me another one and come to find out it was a wiring issue.
Rusty
2013 Mojo
-
04-28-2014, 08:47 PM #5
mine doesnt work as well. i think who ever owned it before me pulled everything but the gauge and power wires..i have to see whats missing and find it online.
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
04-28-2014, 09:06 PM #6Senior Member
- Join Date
- Aug 2013
- Location
- Richmond, VA
- Posts
- 159
Depth Sounder- no display
The wires on the back of these units are very very fine, I mean like fishing line thin. It is very possible that at some point in time it was bumped. Look up underneath the console and make sure the 3 wires I believe are all connected is where I would suggest starting.
Rusty
2013 Mojo
-
04-28-2014, 09:12 PM #7
Depth Sounder- no display
Ya mine is jacked as well. It turns on and beeps but then doesn't read and beeps at me no matter if I'm on the trailer or 50ft of water. That might be my next little project.
Sent from my iPhone using Tapatalk1998 Outback
-
04-28-2014, 09:35 PM #8
Think I will need to try to pull the gauge just to double check everything. something must have gotten bumped or pulled.
It worked great in Oct. of last year!B.J. Reed
2006 Moomba OBV
-
04-29-2014, 02:21 AM #9
where is yalls depth sensor at? i want to see if i still even have one
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
04-29-2014, 08:53 AM #10Senior Member
- Join Date
- Aug 2013
- Location
- Richmond, VA
- Posts
- 159
Depth Sounder- no display
I mounted my transducer just behind the gas tank next to the speedometer paddle wheel in my mojo and my gauge is on the right pod of my dash
Rusty
2013 Mojo