Results 1 to 3 of 3
Thread: Thru-Hulls on XLV
-
06-02-2014, 10:31 AM #1
Member
- Join Date
- Jan 2014
- Location
- Canby, OR
- Posts
- 68
Thru-Hulls on XLV
Anyone swap out their stock thru-hulls for stainless steel on their XLV? Seems that several of you LSV owners have done it but the rear access panel seems to be different on the XLV. It is fastened at the top by two screws which are easily removed but the bottom of the panel is attached to the floor and I cannot figure out how it is attached. Anyone tackled this?
-
06-02-2014, 02:58 PM #2
Senior Member
- Join Date
- Jan 2008
- Location
- Keuka Lake, NY
- Posts
- 7,692
Thru-Hulls on XLV
What year? I added one way valves to each thru hull and had no problems.
Check the seat in front for screws to the panel
Sent from my iPhone using TapatalkA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
06-03-2014, 04:48 PM #3
Member
- Join Date
- Jan 2014
- Location
- Canby, OR
- Posts
- 68
Sorry, it's a 2005. I removed the (2) screws found under the seat cushions but it is still attached to the floor. Looked all around and cannot find any fasteners...
Reply With Quote