Ok guys, another question.

I’ve mounted the amp, I have the power, ground and remote wire hooked up properly. I then go to hookup the speaker wire and the gold post of the speaker connect for hooking the wire into snaps in two on my positive side. There is now nothing that can carry current in Channel 1 on the positive side. This is a 2 channel amplifier. The other channel is fine for inserting the speaker wire.

Is there a way to hook speaker wire up to the Rca Input for one channel and then hook up with speaker wire on the other channel? Can you do something like that without any bad results?
I’ve looked on youtube and found home stereo receivers that they will take speaker wire and splice an RCA cable for like a subwoofer, but I can’t seem to find any car amplifier scenarios.