My 2014 Exile Install...

[BrettLee3232]

If you go back and read his whole thread, he explains how he mounted his speakers.

I have read the whole thread, I assume your talking about this post?

D

"Can't really see it" - exactly what I was lookin for!

The bottom are just surface mounted to the tower cross bars, for the top I got creative...

The clamps are just like what you sell for Axis, except with a 1.875" clamp.

I ordered the base clamp from DIYWake, then I took the mount off of your clamp, drilled the DIY clamp to fit your mount and made the center hole larger, then painted 'em black and bolted together. Bingo bango boom!

He was talking about the upper clamp. I wanted to see how he did the surface mount on the crossbar?

[jstenger]

I thought he posted that earlier in the thread, but realized that this was his second thread. He drilled right thru the crossmember and thru bolted the speakers. He then had to drill a hole thru the front tube and into the crossmember so that he could run the speaker wires into it. The hole in the tube was then covered with a plug.

[jstenger]

Try this one.

https://forum.moomba.com/showthread.php?t=21431

Post 235.