Results 11 to 14 of 14
Thread: LSV moomba flow?
-
06-09-2014, 10:56 AM #11Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I'm running a bag under the seat as well, however I haven't seen any movement. My boat has L brackets from the factory that brace that section. Forgetting to turn the pump off as it lifts everyone up and freaks them out is a different matter...
mmandley, what speeds where you running?http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-09-2014, 06:06 PM #12
Regular I want to say 10.5 to 11 mostly. I had no brackets when I cut the cooler out of mine. Not sure why but thats why mine began to bow outwards towards the center of the boat. I stopped using the bag under the seats because I was afraid it would spider crack the fiberglass.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
01-28-2015, 06:55 PM #13Junior Member
- Join Date
- Jun 2011
- Posts
- 3
-
01-28-2015, 07:56 PM #14Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: LSV moomba flow?
Naw..
Probably better to do a ghetto gate, cheaper, probably better than the flow..http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead