Results 1 to 7 of 7
-
05-10-2014, 09:35 PM #1Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Ballast switches install location
For future reference.. I moved the ignition to the right panel and installed my ballast switches on the left.. Had to extend the ignition wiring and cut the holes..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-10-2014, 09:39 PM #2
Nice and clean
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-11-2014, 09:40 AM #3
Sweeeet! Well done sir. I'm about to upgrade my ballast system and need to add 3 switches. I've been struggling on where to put them. I'm liking your idea a lot!
2008 Mobius LSV
1100#er's in the lockers
ski locker sac
IBS
Johnson reversibles
3 vent heater (which my family loves)
-
05-11-2014, 09:43 AM #4Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Ballast switches install location
I didn't drill and remount two of the breaker buttons, I just zip tied them up near the key..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-11-2014, 10:05 AM #5
Looks good. It's very clean, looks factory.
2008 Outback V
Gravity III ballast
750 rear lockers
Stock center
-
05-12-2014, 09:52 AM #6
Why didn't I think of that?! I need to look at doing that myself....
2017 Moomba Craz
-
05-12-2014, 10:51 AM #7Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead