Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    724

    Default How to clean water strainer?

    Hey guys, I have an 08 lsv and I have the raw water strainer. When I bought the boat new in 09, the strainer was clear and I could see what was going through it easily. 5 years later and it is real cloudy. I can see into it if I look closely but I would like it to be clear again.

    What would you use to achieve this? I was thinking about CLR or something similar. Thoughts?

    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  2. #2
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,010

    Default

    That or simple green,
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >

    https://vimeo.com/59208513?from=outro-local

  3. #3
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,269

    Default How to clean water strainer?

    Let it sit with a vinegar solution for a few hours and then brush out.
    2010 Moomba XLV
    340hp cat
    Gravity 3, wake plate
    Rad-a-cage

    I have a love for ballast and large wakes.
    1100 v-drive lockers
    1180 under the playpen
    + lead and a collection of other ballast bags

  4. #4
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    724

    Default How to clean water strainer?

    Thanks guys.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  5. #5
    Join Date
    Jun 2012
    Location
    Sugar Land, TX
    Posts
    713

    Default

    You could try a little oxy clean, the laundry detergent, in there with warm water for an hour or so too. I used to use that to clean our brewing equipment.
    2011 Mobius LSV

    Ron

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •