Results 1 to 5 of 5
Thread: Thermostat
-
05-01-2014, 07:47 PM #1Junior Member
- Join Date
- Sep 2013
- Posts
- 2
Thermostat
Question on thermostats,
Removed the thermostat last fall to winterized the boat and now can't figure out if it goes on the intake manifold or between the thermostat housing? It's a 2 piece housing with 3 bolts vortec sticker on the top.lower section has the water intake hoses and top section has the hoses to exhaust manifolds
Both spots has a notch for a thermostat
It's a 2004 moomba with a indmar vortec 350
Any help would be Appreciated
Adam
-
05-01-2014, 10:34 PM #2
mine went under the 3 bolt..i think it it looks kinda like a triangle if i remember
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
05-02-2014, 11:14 AM #3
Usually between manifold and housing (on the manifold). Can you see a little recess ring on the manifold for it to sit in?
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
05-02-2014, 03:54 PM #4Junior Member
- Join Date
- Sep 2013
- Posts
- 2
Yes there is a re
ssessed rim on the manifold but the upper triangle piece also has one to?
-
05-02-2014, 04:29 PM #5
I want to say that the spacer/splitter is for better hose clearance and angles. Most automotive applications have the thermo right in the manifold.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...