Page 5 of 8 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 72
  1. #41
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default Moomba Flow Surf Available for 2006 and Newer LSVs

    The thread I linked above was super easy. I added the IBS, and replaced my 2 rear bags with the 1100s. The IBS is filled from a line running from the top vent on my center bag. I use the bosworth valve which let's me choose if I want to fill the IBS or not. I also added the check valves which help get all 4 of my bags flat.
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  2. #42
    Join Date
    Nov 2009
    Location
    Nebraska
    Posts
    742

    Default

    Where do the check valves go? Also don't think I'm going to need the Bosworth as I always like my IBS full. What materials do I need? Can you think of anything else?

    Y Fiiting
    Clamps
    Hose
    Flow Right
    Check Valves?
    2016 Mojo
    2010 Moomba LSV-Sold

  3. #43
    Join Date
    Jun 2012
    Location
    Sugar Land, TX
    Posts
    716

    Default

    Quote Originally Posted by rdlangston13 View Post
    How did you plumb yours in? I'm still throwing a pump over the side


    Sent from my iPhone
    My setup was pretty close to Drew's but I decided after talking with him that I didn't want the Bosworth valve. I basically put my IBS in between my center bag and the vent line. What I did was:

    1. take the vent line from the center bag and change it to a 1 inch quick connect fitting
    2. pulled a 1 inch line from the center bag vent line to the starboard fill port on the IBS
    3. moved the vent line that used to go to the center bag to the IBS vent
    4. added a check valve on all the vent lines to help drain the bags

    I basically fill the IBS from the overflow of the center bag through the starboard fill port. It may not get completely full, but it gets pretty close and it drains well too. Pretty easy setup. I did make a bypass hose that I could use to connect the fill line for the center bag directly to the vent line for the center bag, to bypass the center bag and just fill the IBS, but I've never used it.

    Is that clear as mud?
    2011 Mobius LSV

    Ron

  4. #44
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default Moomba Flow Surf Available for 2006 and Newer LSVs

    I was trying to pull up my order from Wakemakers, but it won't come up.

    If you aren't doing the Bosworth, I'm not sure you need a Y. Mine is used for the overflow of either the IBS or the center bag depending on which way I have the valve turned.

    I cut the hose coming from the thru-hulls at about 8". I installed the check valves there. You can see it here:
    ImageUploadedByTapatalkHD1398225406.610635.jpg

    From memory I ordered:
    Check Valves x 3 @ 3/4" (my vent line sizes)
    Bosworth x 1
    Y barb x 1 @ 3/4"
    Stainless Steel Crimp Band Clamps x 10 @ 3/4", 6 @ 1"
    1" to 3/4" hose barb
    The necessary quick release connects (M/F)
    1" hose and maybe some 3/4" hose, but not sure on that. I tried to reuse the original vent line from my center bag. I might have moved this to the IBS.

    I ordered the crimp clamp tool on amazon, at the time they had a better price. That tool is very handy for clipping of cotter pins too.

    That list is all from memory, so I might have missed a few things.
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  5. #45
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default Moomba Flow Surf Available for 2006 and Newer LSVs

    Ron & I pretty much did the same thing, I just included the valve.
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  6. #46
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    What do you use the valve for? Do you ever only fill one?

    Sent from my Nexus 5 using Tapatalk
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  7. #47
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default

    I say keep it simple and don't use the valve.
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

  8. #48
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default

    Quote Originally Posted by parrothd View Post
    What do you use the valve for? Do you ever only fill one?
    Sometimes I don't fill the IBS depending on what we are doing. I mainly only fill it when we are surfing.
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  9. #49
    Join Date
    Apr 2014
    Posts
    8

    Default

    Install video coming soon on activeh2o.com

  10. #50
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Re: Moomba Flow Surf Available for 2006 and Newer LSVs

    Quote Originally Posted by 1danlay View Post
    Install video coming soon on activeh2o.com
    Awsome!!!!
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •