Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 59
  1. #41
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    That's interesting. I have tried running mine way past the 3 position and it didn't work so well for me.

    I would think pulling it all the way down like that is just adding more drag to make the wave taller, Would be interesting for you to get some videos.

    1 With the flow in each position 1,2,3
    2 With the Flow all the way down like that.

    Then you can watch them and really compare the differences.

    Also to remove the handle you should have 2 screws flush mounted on the back side, Then I would take a bolt and nuts and just put it in the plate and allow adjustment. That should clear your swim deck.

    In the long run though I think you will need to get the Surf style swim deck because in a recent video we took I can see how the surf deck is actually helping create the wave, or at least its not hindering it since we run so much weight.
    Last edited by mmandley; 07-15-2014 at 06:42 PM.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  2. #42
    Join Date
    May 2014
    Location
    Clermont, Fl
    Posts
    586

    Default

    Can you guys with the flow post up some detailed photos of this thing - and from several angles?

  3. #43
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default Moomba Flow Surf Available for 2006 and Newer LSVs

    Mike,

    I think some are actually spinning it all the way around on the surf side and setting off side as you currently are to replicate the SWELL.

  4. #44
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Re: Moomba Flow Surf Available for 2006 and Newer LSVs

    Quote Originally Posted by wolfeman131 View Post
    Mike,

    I think some are actually spinning it all the way around on the surf side and setting off side as you currently are to replicate the SWELL.
    Wow. I didn't even think about copying the SWELL. That might just work. I can't wait to install mine.
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

  5. #45
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by wolfeman131 View Post
    Mike,

    I think some are actually spinning it all the way around on the surf side and setting off side as you currently are to replicate the SWELL.
    So deploy the Surf side all the way down?
    Deploy your non surf side as normal?

    < Mind Blown >
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  6. #46
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default Moomba Flow Surf Available for 2006 and Newer LSVs

    That's the thought.

    I tried it, but didn't really get it to spin down as far as I thought it should go and it seemed to make the wave washy. I only tried it one time and didn't mess around with it too much. In theory, it sounds like it will work.

  7. #47
    Join Date
    Aug 2010
    Location
    Nokomis, Saskatchewan
    Posts
    647

    Default

    This is really interesting... im gonna try this today!!

    Sent from my SGH-I337M using Tapatalk
    2014 Mondo with da flow!!! Exile towers, stock everything else.... for now!

  8. #48
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by saskyrider View Post
    This is really interesting... im gonna try this today!!

    Sent from my SGH-I337M using Tapatalk
    If it works, get a regular deploy pic and an all the way down pic so we can see the wave, I tried it a while ago but like Drew I just got wash.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  9. #49
    Join Date
    Aug 2010
    Location
    Nokomis, Saskatchewan
    Posts
    647

    Default Re: Moomba Flow Surf Available for 2006 and Newer LSVs

    Quote Originally Posted by mmandley View Post
    If it works, get a regular deploy pic and an all the way down pic so we can see the wave, I tried it a while ago but like Drew I just got wash.
    Will do... I am taking my nephews and nieces out today so it will be mainly a tubing and kneeboarding day today

    Sent from my SGH-I337M using Tapatalk
    2014 Mondo with da flow!!! Exile towers, stock everything else.... for now!

  10. #50
    Join Date
    May 2009
    Location
    Western Michigan
    Posts
    23

    Default

    Quote Originally Posted by jstenger View Post
    Take a look at the LSV Flow. They added another spring pin on the bottom and more holes in the plate. Looks like more than just 3 settings now. I had heard that it really changes the wave when it is spun all the way around to the bottom. More of a bottom effect than a side effect.


    Ok to answer the many questions. The FLOW for the LSV is different than the Mojo. The LSV's is only deployed down, not to the side. Different hull, different spot to create the wave.

    There are only three positions to lock it in, and the pic is with it in the first position.
    08 LSV, FAE, GIII upgraded to Johnson Reservable pumps, Evolution Cover, Flow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •