Results 1 to 5 of 5
-
04-15-2014, 01:56 PM #1
Adaptor for standard board racks to a tube tower??
I have a couple of real nice racks from my '13 OBV that a couple of people have inquired about but they don't have the Oz tower with the standard three hole mount -- anyone know of an adaptor that would convert from the 3 hole mount to a tube tower?
Attached a couple of pics of the mounts in case anyone isn't clear what I'm talking about...
Thanks.
attachment.jpgphoto.jpgMike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
04-15-2014, 03:20 PM #2
contact http://www.skylonsports.com/
-
04-15-2014, 05:54 PM #3
Actually I think these are Roswells?
Jeff
2012 Outback V
-
04-15-2014, 08:58 PM #4
Correct, they are Roswells and I have already reached out to them for advice.
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
04-16-2014, 08:24 AM #5
I finally sold the racks but for anyone who cares.............I heard back from Roswell and you can use their universal mount to take the stock racks and mount them on a tubular tower.
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...