Results 1 to 5 of 5
-
04-04-2014, 03:16 PM #1
Rear compartment separator wall thickness?
Can anyone get a quick measurement and let me know what the thickness is of the rear compartment wall / separator? (see below) Doesn't really matter what year/model boat you have.
I'm about to rebuild/replace my existing ones that aren't cutting it for the new split cushion sundeck support.
Debating on going with 1/2" vs 3/4". The 1100 bags put a fair amount of stress on it, but then again I'm wondering if going thicker is overkill as these sheets are spendy stuff.
Thanks
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-04-2014, 03:35 PM #2
-
04-04-2014, 05:39 PM #3
Thanks Joe - do they seem beefy enough to you? My old ones are covered with carpet on both sides so it is hard to get a good idea of exactly how thick they are. But I can see they've flexed a little.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-04-2014, 06:15 PM #4
Re: Rear compartment separator wall thickness?
Last edited by jstenger; 04-04-2014 at 06:18 PM.
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
04-06-2014, 05:49 PM #5Senior Member
- Join Date
- May 2013
- Posts
- 253
3/4 is way over kill