Results 1 to 10 of 16
Thread: Putting Tower Speakers on a Mojo
-
04-01-2014, 11:36 AM #1
Putting Tower Speakers on a Mojo
Is there any pre wiring in a 2013 Mojo's tower? Any tips for drilling, placement, etc.?
-Jake
-
04-01-2014, 11:46 AM #2
Putting Tower Speakers on a Mojo
What speakers are you looking at?
Sent from my iPhone using Tapatalk2022 Moomba Mojo
2013 Moomba Mojo 2.5 (sold)
Tow - 2019 Ford F150 Ecoboost
-
04-01-2014, 01:19 PM #3
No prewiring if not ordered. I have voiced several times why in the heck don’t xtp predrill a hole in the up tube before welding the back cross tube. It would be a cleaner install as what is happening now for most. They drill it on the driver side for the tower light wire...sorry for the rant...
As mentioned depends on the speakers...Exile clamp is large and would not fit where the factory hole is, so had to jumper the wire and move it inward. A friend was able to put WS Rev10 where the factory hole is, but had to make it larger to drill inside of the upright tube. It was a true wireless look install.
-
04-01-2014, 01:44 PM #4
You could probably find other details with a search, but this thread should give you plenty of ideas on placement.....https://forum.moomba.com/showthread....ur-tower-setup
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
04-01-2014, 03:05 PM #5
And even more importantly - WHY DO YOU ASK?! Hmmmmmm?
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
04-01-2014, 03:20 PM #6
Putting Tower Speakers on a Mojo
Lol! I wish. I have a stoked buddy right now and the more I help him the more he can spend at Exile and Wakemakers.
He just got into and out of an I/O in the last year and picked up a new 2013 Mojo. He's already bringing a bunch of Exile gear with him.
For this year he is getting a pair of surf 9's and will be adding another pair next year. My goal is to set it up for the (4) now. Any pics of where anyone drilled would be a big help. I don't even know how the tower folds lol.-Jake
-
04-01-2014, 04:11 PM #7
I plan on doing mine like the RoMoBoCo Mojo this weekend.
That's the plan anyway. We'll see when I get everything in.Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
04-01-2014, 09:11 PM #8
Putting Tower Speakers on a Mojo
Great pics thank you!
-Jake
-
04-01-2014, 09:24 PM #9
Putting Tower Speakers on a Mojo
I saw this boat on a video they had posted (somebody here posted it for the Flow). I then looked and they had the boat on their site. I copied every picture they had for reference . If it's not still on their site, let me know and I can give you a link to the rest.
Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)
-
04-01-2014, 09:27 PM #10
Putting Tower Speakers on a Mojo
Here is a link to the gallery with those picture and a few more
http://www.smugmug.com/gallery/n-tkKjg/Matt
2021 Mojo
2016 Mojo (sold)
2012 LSV (sold)