Results 1 to 5 of 5
Thread: Oz tower bar size?
-
03-21-2014, 10:42 PM #1Member
- Join Date
- Oct 2013
- Location
- Gladwin/Calumet, MI
- Posts
- 75
Oz tower bar size?
Can anyone give me a size of the cross bars on the oz tower (2013 OBV). I am looking to see if a roof rack pad will fit around them. My boat is 7 hours away and won't be seeing it until May.
Thanks
-
03-24-2014, 12:23 PM #2
Oz tower bar size?
If it's not the HD then they should be 1 7/8
Sent from my iPhone using TapatalkShane
2016 Supra SE
EXILED
6 XM9 Tower
6 Wetsounds XS650 Cabin
1 EXILE BIG 12 DVC 2000 watt in a ported box
1 XM 15.4
XI 1500.1
2 MX 30.2
Wetsounds 420 EQ
EXILE Blue tooth EXBT4
Blue LEDs
-
03-24-2014, 07:53 PM #3Member
- Join Date
- Oct 2013
- Location
- Gladwin/Calumet, MI
- Posts
- 75
Thanks, what i am thinking about doing is strapping my wake surfer to the tower when I run out of room on the racks. Many times we carry 4-5 boards 1 wakeskate and 2 surfers. I found some foam pipe insulation that will protect the tower/board. Has anyone done this? I was gonna use some light weight ratchet straps (not as neat looking) i dont think bungee straps will work holding the board up (they will have to hang down because if the bimini
-
03-24-2014, 08:53 PM #4
Oz tower bar size?
I'm thinking about having a few pockets sewn onto the top of my bimini to hold 2 surfboards.
-
03-24-2014, 09:30 PM #5Member
- Join Date
- Oct 2013
- Location
- Gladwin/Calumet, MI
- Posts
- 75
I like that idea except I live in a cooler climate so the bimini is closed most of the time. We try not to hide from the sun. This will allow it to be stored with the top rolled up.
Be sure to post pics. I might still go that route. I won't be using it that much anyways.