Results 1 to 10 of 25
Thread: vinyl
-
03-08-2014, 09:10 PM #1
vinyl
thinking about redoing the seats in my boat..dont seem to hard with some spray adhesive and some sowing..im thinking carbon(looking) blue and some charcoal grey..boat is blue and white. i also sprayed the tower in a plastidip black( everything is holding up besides where the speaker mounts were when we moved them a little and ripped a little off ). also planning on doing the windows in a tint. depending on how much all this repairs will cost
im wondering what yall would think with blue and charcoal..the carpet is a light grey but i plan on redoing that as well.Last edited by motosno963; 03-08-2014 at 09:14 PM.
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-08-2014, 11:09 PM #2
vinyl
Not quite charcoal but some blue and gray for you.-Jake
-
03-09-2014, 04:05 AM #3
im thinking no white for the seats but i dont know yet..i wish i was good at photoshop haha i could take a pic of my interior and photoshop it with the charcoal and blue
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-10-2014, 03:33 AM #4
anyone know what else to go with new vinyl?.. i think some spots have like a clear plastic under the vinyl?
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-10-2014, 02:59 PM #5
If I were you I'd copy Jake! He sent me a ton of pics and his looks schweeeeeeeeeeeeet.
I'm not a big fan of white vinyl in a white hull because one or the other is always going to be off a little or look dirty.
Charcoal is going to look almost black from just a little ways away and definitely gets hot. If you're looking for a high contrast finish then charcoal with a bright blue and some lighter gray would look sharp IMO. Hard to beat the combination of light/dark with a bright color to set it off. If you don't go with carbon fiber, you can do other accents, stitching or patterns to change it up. Mine is all lightly textured Naugahyde with some style mixed in.
Like dis-
(shameless self plug done)So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-10-2014, 08:28 PM #6
Well I'm going to do it myself with a person who can use a sowing machine so it won't be as nice as yours haha..not a big fan of the white on the seats haha . I deff wanna do some textured vinyl and carbon will be one of them. How hard was the captains seat? I think that will be the hardest
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-10-2014, 11:22 PM #7
vinyl
-Jake
-
03-11-2014, 02:50 AM #8
yeaa that in blue
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-11-2014, 11:53 AM #9
vinyl
-Jake
-
03-11-2014, 11:55 AM #10
vinyl
-Jake