Results 1 to 10 of 11
Thread: dripless seal
Hybrid View
-
03-08-2014, 01:36 PM #1
dripless seal
Anyone use this OJ seal on there boat?. i dont think mine has ever been replaced and just thinking if i should go dripless. i have a camping trip in july and i want to make sure everythings good to go.
and i do have a 1" shaft since its the OB
http://bakesonline.com/detail.aspx?ID=21812004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-08-2014, 01:49 PM #2
dripless seal
That is factory on my boat.
2018 Max with a little extra weight here and there
-
03-08-2014, 02:02 PM #3
i might grab one
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-08-2014, 03:21 PM #4
dripless seal
Never had a problem with mine.
2018 Max with a little extra weight here and there
-
03-08-2014, 06:09 PM #5Senior Member
- Join Date
- Dec 2006
- Location
- Tuscaloosa, Alabama
- Posts
- 815
Have you tightened the current one up any? I have had mine replaced once in 9 years and it didn't need it then. I haven't touched mine in 2 years. For what its worth
Jack Beams
'05 Outback DD
325HP EFI Indmar
-
03-08-2014, 08:47 PM #6
i can try..il have to go buy a wrench..anyone know the size of the nut for the 1'' shaft?
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
03-08-2014, 09:38 PM #7Senior Member
- Join Date
- Dec 2006
- Location
- Tuscaloosa, Alabama
- Posts
- 815
I just used a pair of channel locks. Loosen the jamb nut (the thin one) and turn the big one just a little. Might be able to turn with your hand. Should do this in the water to watch for the drip. Needs to drip about every 30 to 45 seconds while boat is in gear idling. Not hard at all.
Jack Beams
'05 Outback DD
325HP EFI Indmar
-
03-09-2014, 12:55 AM #8
Graphite cord installed 10 years ago and adjusted once two years back.
1998 Mobius
310 HP PCM
SOLD