Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Driver Cup Holder Removal

    For those of you with Mojo's and newer LSV's, how do you remove the cupholder next to the driver's feet? Thanks.
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

  2. #2
    Join Date
    Oct 2008
    Location
    Central, Arkansas
    Posts
    847

    Default

    Pull out the cups, and you shall see...

  3. #3
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Mine was screwed is from the inside, had to pull out the cup holders.

    Just keep the 3m tape clean if you plan to reuse it and it will restick.

    Mine has not came back apart since we removed it to remove the fiberglass hump and install the sub.

    Helm after removal


    Hump



    How it is now.

    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  4. #4
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    on my lsv, pulled the cup holders, 2 Phillips screws in the bottom
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •