Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    Jan 2014
    Posts
    2

    Default Part needed for my 2000 Moomba Mobius but do not know what it is called???

    I need to find a replacement part for our 2000 Moomba Mobuis but not sure what the part name is. It's located on the back lower portion of the boat & there is one of each side. Please see the attached picture. We believe it is part of the ballast system where the water is sucked it but not sure. Thanks for any help you can give!
    Attached Images Attached Images

  2. #2
    Join Date
    May 2011
    Location
    Flower Mound, TX
    Posts
    1,506

    Default

    I think that is the speedo??? Others may know better
    '08 Mobius LS. Sold
    '18 Craz "TypeO"
    REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's

  3. #3
    Join Date
    Jun 2013
    Location
    Naperville, IL || North Scott Lake, MI
    Posts
    1,455

    Default

    I would concur -- looks like the speedo to me
    Mike

    2013 Outback V
    - ballast: 900# rears / 400# center / 650# IBS
    - audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
    - FAE
    - DIY suckgate

    2003 SeaRay 182 -- gone but not forgotten...

  4. #4
    Join Date
    Nov 2009
    Location
    Kaukauna, WI - 3minutes from glass
    Posts
    2,132

    Default

    Did it break off? If it isn't leaking time to install PP stargazer with GPS for speed.
    -Mark
    14 Mojo - 72 hours and growing
    02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.

    "Hey you only live once"

  5. #5
    Join Date
    Jan 2014
    Posts
    2

    Default

    Thanks guys! That's what it is & going to get two new ones ordered!

  6. #6
    Join Date
    Aug 2011
    Posts
    2,522

    Default Re: Part needed for my 2000 Moomba Mobius but do not know what it is called???

    Why bother, use that money for a prefect pass..

    Sent from my Nexus 5 using Tapatalk
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  7. #7
    Join Date
    Dec 2006
    Location
    Tuscaloosa, Alabama
    Posts
    815

    Default

    It is called a pitot(sp) tube.
    Jack Beams
    '05 Outback DD
    325HP EFI Indmar

  8. #8
    Join Date
    Oct 2013
    Location
    Ft. Collins, CO
    Posts
    688

    Default

    Why are you replacing them? Pitot tubes commonly get plugged with sediment and the result is the speedo fails. You can usually unscrew the tube and clean things out.

    But if you didn't know it was part of the speedo... how did you know it needed to be replaced?
    2007 Mobius LSV
    1989 Sanger Skier DX - sold

  9. #9
    Join Date
    Aug 2013
    Location
    DFW
    Posts
    857

    Default Part needed for my 2000 Moomba Mobius but do not know what it is called???

    ^^^^^ this
    Matt
    2021 Mojo
    2016 Mojo (sold)
    2012 LSV (sold)

  10. #10
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Need to pull the line loose from the back of the speedometer and blow it out. They get water up in them sometimes. Or they get pinched. That's why you have two speedos for tournament use. If they were worth a crap you'd only need one. (By the way, you can make your boat a lot faster by drilling the hole out a little bit.)
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •