Results 1 to 6 of 6
-
01-19-2014, 02:40 PM #1Junior Member
- Join Date
- May 2011
- Posts
- 26
2014 Mojo Hull Design Versus 2006 Moomba XLV GG Hull Design
Any help would be greatly appreciated!
My boat lift is configured for a 2006 Moomba XLV GG boat that I just sold. I have since ordered a 2014 Mojo that will be here in a month or so. I want to make sure my lift cradle is ready to go!
Does anyone know any differences in the hulls and/or where I could find any information?
-
01-19-2014, 04:27 PM #2
2014 Mojo Hull Design Versus 2006 Moomba XLV GG Hull Design
Look at the archives. The XLV is longer, but not sure about beam or weight. I think the Mojo is wider & heavier. Mine is in storage, but maybe someone else on here (or your dealer) will let you know how wide apart to set your rear bunks.
-
01-19-2014, 06:55 PM #3
2014 Mojo Hull Design Versus 2006 Moomba XLV GG Hull Design
Beam on the Mojo is 1" wider (99 vs 9
Mojo is 200lbs heavier
XlV is 6" longer
Not sure about spacing for bunks....2018 Max with a little extra weight here and there
-
01-19-2014, 10:04 PM #4Junior Member
- Join Date
- May 2011
- Posts
- 26
Thanks! I think I am going to wait and just get measurements off trailer.
-
01-20-2014, 09:31 AM #5
Congrats on the new Mojo!
2022 Moomba Mojo
2013 Moomba Mojo 2.5 (sold)
Tow - 2019 Ford F150 Ecoboost
-
01-20-2014, 10:53 AM #6Junior Member
- Join Date
- May 2011
- Posts
- 26
Thanks! I have about a month before it comes in!!!