Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    May 2014
    Location
    Midwest City, OK
    Posts
    54

    Default 2015 Mondo Wet Sounds

    I finally got around to finishing my "winter" project. We started on it last Friday night and should have it finished up today. We ordered the boat with just the basic audio package; 4 cabin speakers, no bow speakers, no tower speakers, no amps. Here is the upgrade list:

    Amps: SD4 (tower) and SD6 (cabin)
    Tower: Icon8 (4)
    Cabin: XS-650 (6)
    Wiring: T-Spec
    Extras: 20' Blue LED Strips

    IMG_4069.jpg
    2015 Mondo
    1997 Monterey 196 (gone but not forgotten)

  2. #2
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    NICE.....that's a lot of RCA's you got there!

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  3. #3
    Join Date
    May 2014
    Location
    Midwest City, OK
    Posts
    54

    Default

    Thinking ahead and running a couple of spares for a sub/EQ (next winter upgrade). Since the Fusion head unit only has one RCA line-out we had to get a LOT of y's.
    2015 Mondo
    1997 Monterey 196 (gone but not forgotten)

  4. #4
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    The amps also have pass through switch so you can run all channels off one line in. Basically only need 2 sets and a Y in your case no?

    A WS420 might work well in your situation. One RCA in from fusion to EQ, then one RCA each to amp on each zone - in boats, towers, and sub. Just a thought

    I have the SD6 running the 6 in boats (1pr on 1,2 and 2pr on 3,4) and sub. So I have channels 1-4 running off one line in and then a 2nd line in on 5-6 for the sub. If I upgrade to a 3rd amp I will just plug the sub RCA's into the new amp and change the setting on the amp to pass through and have dedicated channels for all 6 inboats.

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  5. #5
    Join Date
    May 2014
    Location
    Midwest City, OK
    Posts
    54

    Default

    Good to know! We are mounting/tuning the amps today so I'll see what my installer says. We just wanted enough connectors for any situation since distributor/warehouse is closed on the weekend. The WS-420 is exactly what I need next. I ordered the equipment during Wet Sounds Black Friday sale before we even ordered the boat. Now that we see how the Fusion unit works it won't have all the control we initially thought it would have.

    Starting to come together!
    IMG_4072.jpg
    2015 Mondo
    1997 Monterey 196 (gone but not forgotten)

  6. #6
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    Quote Originally Posted by bluice311 View Post
    I ordered the equipment during Wet Sounds Black Friday sale before we even ordered the boat.
    IMG_4072.jpg
    That's funny - did the same thing!!
    did you get the RGB xs650's?

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  7. #7
    Join Date
    May 2014
    Location
    Midwest City, OK
    Posts
    54

    Default

    Nice! It sure was a great deal!

    Nah, we just went with all black. Made it look like a bigger speaker being all black instead of the translucent or silver cone. We did get the lit Moomba logo from the factory but we have been installing 2-3' blue LED strips above all the speaker/cup holder pockets.
    2015 Mondo
    1997 Monterey 196 (gone but not forgotten)

  8. #8
    Join Date
    May 2014
    Location
    Midwest City, OK
    Posts
    54

    Default

    Thanks for the suggestion on the RCA's! We were getting some strange feedback using the y's and we had never seen that Source Input Selection on previous amps. Changed the source, removed the y's, and problem solved! Finally finished at 2am so we didn't get a chance to photograph all the finished products but here is a preview; LED's doubling as a work light...
    FullSizeRender.jpg
    2015 Mondo
    1997 Monterey 196 (gone but not forgotten)

  9. #9
    Join Date
    Aug 2009
    Location
    Montana
    Posts
    3,062

    Default

    No Prob! Looks like your taking a nap...........LOL

    2007 Moomba Outback - going, going, GONE
    2015 "NOT A MOOMBA"

    Why Not? Play Hard! Get wet

  10. #10
    Join Date
    May 2014
    Location
    Palm Desert, CA
    Posts
    1,541

    Default 2015 Mondo Wet Sounds

    Looks good man, what are you gonna do about bass?


    Sent from my iPhone using Tapatalk
    2015 Mondo

    Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS

    2079 Prop

    Auto Flow 2.0

    Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •