Results 11 to 20 of 20
-
11-12-2013, 05:05 PM #11Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Outback V Rear Side Hatch Hinges +06 Models...
That's a different boat..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-12-2013, 05:52 PM #12
Close to your dimensions - but not cheap...
http://greatlakesskipper.com/powerqu...t-hinge-single
I'd suggest contacting Jon at SC directly - ask for the part number and dimensions of the hinge(s) for a 2006 OBV. Then contact your favorite SC dealer and have them order it. Will save you a lot of time. Not money necessarily, but time.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
11-12-2013, 06:54 PM #13Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Outback V Rear Side Hatch Hinges +06 Models...
Email sent..
Probably just use a piano hinge and add some mounting hardware to the cushion then I can mount it anyway I need to..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-14-2013, 01:19 PM #14Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
11-14-2013, 01:20 PM #15Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
-
11-14-2013, 01:22 PM #16Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
11-14-2013, 03:52 PM #17Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Great! Thanks...
This is the measurement I really needed...It looks to be around an 1in, thanks!
20131113_150238.jpghttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-14-2013, 04:14 PM #18Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Get an email back from Skiers Choice, should be 100589...
Thanks all!
That look like a hinge used on the 2008 Outback V. Part number 100589 Hinge Z ship 1” H x 3”.http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-14-2013, 05:25 PM #19Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
So the one image I did not take with a reading is the one you needed. Always happens that way. I say it does look like one inch. If you need it I can get back out there tonight to get it for you.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
11-14-2013, 05:49 PM #20Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
No worries, that was good enough!.. Thanks!
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead