Results 1 to 10 of 20
-
11-09-2013, 08:04 PM #1Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Outback V Rear Side Hatch Hinges +06 Models...
Could someone with a newer Outback V (2006+) that has the 3 section rear sunpad provide their dimensions? Maybe take a picture of what they look like? There should be 2 on each side..
I'm looking to convert my rear sunpad from a single one to a three door version but need to find the hinges.http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-10-2013, 11:50 PM #2Senior Member
- Join Date
- Jun 2008
- Location
- Eugene OR
- Posts
- 1,786
I have a 08 OBV and will try to make it out to my storage unit in the next few days to get some dimensions for you unless someone gets to it first.
2008 Outback V - Sold but never forgotten.
“Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill
-
11-10-2013, 11:52 PM #3Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Thanks !
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-11-2013, 01:40 AM #4
Outback V Rear Side Hatch Hinges +06 Models...
Not the right year or model but here you go:
-Jake
-
11-11-2013, 01:41 AM #5
Outback V Rear Side Hatch Hinges +06 Models...
-Jake
-
11-11-2013, 11:24 AM #6Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Outback V Rear Side Hatch Hinges +06 Models...
Thanks, those are too tall for the older lsv, hoping the outback has shorter ones, closer to an 1in 1/2..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-11-2013, 02:39 PM #7
Really? I'm surprised. I would think they're all very close on height from the support lip up to the edge... (the height of the cushion)
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
11-11-2013, 08:20 PM #8Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
I was hoping so.. The lsv cushion is 2.5± inches tall, with 1in exposed when closed on the sides..The Möbius v cushion appears to be flush..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
11-12-2013, 11:59 AM #9
Yes - was pretty much flush. Mine stick up a bit now though.
Try Great Lakes Skipper. I bet you'll find something that will work. Search for "offset piano hinge" or similar but be prepared to burn a couple hours comparing options. They do show some good measurements and multiple pics though. I tried a powder coated white hinge first but couldn't make it work - for $20 I figured it was worth a shot.
I would have been willing to just go with an aluminum hinge and either paint it white or even plastidip it. If you wrap it with vinyl when installing you'll rarely see much of it anyway.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
11-12-2013, 05:00 PM #10
Outback V Rear Side Hatch Hinges +06 Models...
-Jake