Results 1 to 5 of 5
-
10-06-2013, 08:57 PM #1
Senior Member
- Join Date
- Jan 2013
- Location
- Northeast, PA
- Posts
- 236
Installation of fuel water separator?
I have a question about installing a fuel water spearator on 07 OBV. I bought a Mercury fuel water separator from my Moomba dealer. It will be easy to install but I am stumped on one thing. The fuel water separator has 2 inlets & outlets? I am not sure if iam supposed to connect the return line into the fuel water separator or not? Has anyone else installed one that could provide some pictures or guidance. Any help is always appreciated.
20131006_203153.jpg2007 Moomba Outback V
-
10-06-2013, 09:56 PM #2
Member
- Join Date
- Jul 2008
- Posts
- 88
Re: Installation of fuel water separator?
I have one, just directly replaced the old fuel filter and capped the 2 unused ports. I can take a pic tomorrow if you needed one.
Originally Posted by Gabbyg88
Sent from my Slider SL101 using Tapatalk HD06 Mobius LSV, GIII (now with 1100 in the port locker), perfect pass, wakeplate
Kicker KM10 Sub, dual batteries
-
10-06-2013, 11:01 PM #3
Senior Member
- Join Date
- Jan 2013
- Location
- Northeast, PA
- Posts
- 236
Picture would be great. Thank you. The kit came with 2 plugs
2007 Moomba Outback V
-
10-07-2013, 09:06 AM #4
Member
- Join Date
- Jul 2008
- Posts
- 88
Re: Installation of fuel water separator?
As seen from the top:
It is difficult to remove the filter, last time I had to remove the fuel hoses going into the tank and bend them out of the way to get to the filter with a wrench.
As seen from the side
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 BetaLast edited by REDFIVE48; 10-07-2013 at 09:10 AM.
06 Mobius LSV, GIII (now with 1100 in the port locker), perfect pass, wakeplate
Kicker KM10 Sub, dual batteries
-
10-07-2013, 04:40 PM #5
Senior Member
- Join Date
- Jan 2013
- Location
- Northeast, PA
- Posts
- 236
Thank you for the pictures. Greatly appreciated!
2007 Moomba Outback V
Reply With Quote