Results 1 to 5 of 5
Thread: Nav lights
-
09-15-2013, 02:40 PM #1Junior Member
- Join Date
- May 2012
- Posts
- 5
Nav lights
Any advice on changing the bulbs in the nav lights? (Red&green on the bow).
-
09-16-2013, 09:27 AM #2Banned
- Join Date
- Oct 2005
- Location
- Durham, NC
- Posts
- 649
I had broken the housing on mine, so I had to replace the entire thing. It is in multiple pieces and was not very intuitive to get apart. It may depend on what boat you have. My 2001 Outback replacement was the Attwood Quasar. The installation instructions are available on their website and will give you some insight into how to get inside to the bulbs. Good luck.
-
09-16-2013, 10:27 AM #3
What year boat do you have?
Mine has a tiny set screw that needs removed then the housing and lens pops off, with some force applied. Mine takes those whacked looking bulbs with pointed caps on each end like this
http://www.go2marine.com/product/161...ps-529102.html
Edit: If I remember correctly I think I had to twist it some for it to come off. Can't recall which direction, probably counter clockwise, but just guessing...Kraig - 2010 Outback V
-
09-16-2013, 12:00 PM #4Senior Member
- Join Date
- Aug 2011
- Location
- Newnan, GA
- Posts
- 186
Yep, remove the set screw to take the chrome piece off and then twist the red/green lens.
2015 Supra SE 550
-
09-16-2013, 05:30 PM #5Junior Member
- Join Date
- May 2012
- Posts
- 5