Results 1 to 6 of 6
Thread: need a little help
-
09-12-2013, 05:44 PM #1Senior Member
- Join Date
- Apr 2010
- Location
- saskatchewan, canada
- Posts
- 334
need a little help
Hey guys was looking at fabing up some wake gates, does anybody know if my 05 lsv hull is the same as 03 supra 22 ssv??
2017 Helix
Wakemakers 1050s
Bow bag ( Surf edition)
Autowake
-
09-12-2013, 07:18 PM #2
Not sure if your hull is the same but here is a link that has a number of DIY's on wake/surf gates. The Malibu guy's are all over this....
http://www.themalibucrew.com/forums/...d/?hl=poormans
Checkout the Moomba Modifications section if you want info on the surf/trim tab install I'm doing.2002 Moomba Outback LSV
-
09-12-2013, 07:56 PM #3Senior Member
- Join Date
- May 2013
- Posts
- 253
linkynoworky
-
09-12-2013, 11:33 PM #4
Try this:
http://www.themalibucrew.com/forums/...d/?hl=poormans
You might need to sign up for that board to see all the pics...2002 Moomba Outback LSV
-
09-12-2013, 11:43 PM #5
What does "same" mean? If you mean did they come out of the same mold, then no. They are also not the same length nor the same shape.
You might want to consider the shape of the side of your hull while comparing yours to the 03 SSV...I believe the SSV is pretty flat on the side near the transom (similar hull to my old Launch), however I think yours might have some sort of shape to it and may not be quite flat (only speaking from pics since I have never really seen one in person). Might be something to think of when comparing setups.Boats previously owned - 2000 Supra Launch, 2003 Outback, 2006 Mobius LSV
-
09-13-2013, 12:21 AM #6Senior Member
- Join Date
- May 2013
- Posts
- 253
he means the same mold as in identical.