Results 1 to 10 of 11
-
08-14-2013, 02:15 PM #1
Any interest in a group buy on the SeaDek pad on the engine walkover??
I reached out to SeaDek inquiring on the pad that Ian got and installed on his 2013 OBV (see pics below). They want $150 as a custom cutout which I thought was a bit steep, but they tell me we can get it for $85 + shipping if we get 5 or more buyers. The only caveat is that they all have to be the same color combo -- I was going to opt for the Gray / Black combo to match the pad on the swim platform, but I would be open to other ideas.
I know the pad will fit at least the 2013 OBV (because that is what Ian has), but not sure about other models. I have also attached the exact specs (see attached PDF) on the size so others can determine if it will also fit other Moomba models.
If you would like to look at all the colors, other info on the product, etc., see their website at seadek.com.
Let me know if others are interested.
pad.jpgpad installed.jpg
Z102372-PV.pdfMike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
08-14-2013, 04:17 PM #2
Any interest in a group buy on the SeaDek pad on the engine walkover??
I need one but it has to be a custom size.
-Jake
-
08-14-2013, 05:28 PM #3
Any interest in a group buy on the SeaDek pad on the engine walkover??
I believe the walkthrough is specific to the 2013 OBV.
I absolutely love having this on the boat, saves the fiberglass and is waaaaayyyy cooler (temperature) than the black fiberglass!2013 Outback V
-
08-14-2013, 06:12 PM #4Member
- Join Date
- Apr 2013
- Location
- Da Creek, NC
- Posts
- 53
Re: Any interest in a group buy on the SeaDek pad on the engine walkover??
I am in. I have not ordered mine yet.
Sent from my DROIDX using Tapatalk 2Skippydo
2013 Moomba Outback V
-
08-14-2013, 06:13 PM #5
Any interest in a group buy on the SeaDek pad on the engine walkover??
Also, not sure if joe quoted for both pieces, or just the main. Probably worth asking!
2013 Outback V
-
08-14-2013, 06:23 PM #6
Any interest in a group buy on the SeaDek pad on the engine walkover??
It seems it contains both pieces, as that's what shows in the specs in the PDF.
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
08-14-2013, 09:17 PM #7Member
- Join Date
- Apr 2013
- Location
- Da Creek, NC
- Posts
- 53
Got to have both pieces. Two weekends ago I was at the dealer and one of the gents stepped on the angled section and down he came. Standing and falling to the floor is a ways to fall on a trailered boat. I know we are not even standing on ours due to past falls.
Skippydo
2013 Moomba Outback V
-
08-15-2013, 11:32 AM #8
I confirmed with the vendor that the price quoted does include the smaller second piece. I asked him about possibly making the pad one big piece and he did not advise that based on some possible adhesion issues.
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
08-21-2013, 07:49 PM #9
Any interest in a group buy on the SeaDek pad on the engine walkover??
Got three takers but need 2 more to get the deal -- any other OBV owners out there interested??
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
-
08-29-2013, 10:30 AM #10Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...