Results 1 to 9 of 9

Thread: opinions needed

  1. #1
    Join Date
    Aug 2012
    Posts
    160

    Default opinions needed

    I ordered a set of stock decals to put in my interior and really like the way they look. After I put them on, I really didn't like them on the hull anymore, so I pulled them off.

    photo.jpg photo (2)1.jpg
    Then as I had the removed decals, I temporarily stuck the "LSV" on the tower. I don't know if I like it or not. It isn't centered in the picture, but you get the idea..

    photo3.jpg

    Keep it (order new ones)? Or toss it?
    Nate

    2008 XLV GG (sold)
    2013 LSV

  2. #2
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    like it on the inside
    not sure about the lsv on the tower--i put a roo sticker there myself

    ......
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  3. #3
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,020

    Default

    I like it. the lsv on the tower seems to make it look less "naked"

    the ones on the inside look good as well. nice choice..
    '06 Supra Launch 20SSV-gone but never forgotten

  4. #4
    Join Date
    Jul 2013
    Location
    Saskatoon, Saskatchewan
    Posts
    174

    Default

    I like the look on both the inside and the tower.
    2008 Moomba Mobius LSV Ballast III (stock), Heater, Roswell Quad Spin Pro, Bimini

  5. #5
    Join Date
    Jun 2013
    Location
    Oxford, MI
    Posts
    635

    Default

    I think it looks real good on the tower
    Boats previously owned - 2000 Supra Launch, 2003 Outback, 2006 Mobius LSV

  6. #6
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Yea, me too!
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  7. #7
    Join Date
    Aug 2012
    Posts
    160

    Default

    Thanks for the opinions. I will order a couple and put them on the tower.
    Nate

    2008 XLV GG (sold)
    2013 LSV

  8. #8
    Join Date
    Feb 2009
    Posts
    442

    Default

    If they are in good condition, could you just retape them with some body molding tape? Just throwing an idea out. Since there are on the inside, and not exposed to the water conditions.
    2003 Outback, Assault EFI, (6) Polk Audio DB651s, JL Audio M6600 amp, JL Audio M1700 amp, JL Audio 10w6v2 subwoofer

  9. #9
    Join Date
    Aug 2012
    Posts
    160

    Default

    Quote Originally Posted by Hoopskier View Post
    If they are in good condition, could you just retape them with some body molding tape? Just throwing an idea out. Since there are on the inside, and not exposed to the water conditions.
    The ones on the interior are new. The one on the tower was an old one I took off of the side.

    I could re-use it but when I removed the letters, the chrome creased since I had to bend them to peel them off.
    Nate

    2008 XLV GG (sold)
    2013 LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •