Results 1 to 2 of 2
08-01-2013, 03:06 PM #1
Cleaning products for the bottom of your board??
What are you guys using to make sure the bottom of your board stays clean and fast!?
We have really hard water down here so oxidation is a problem on boards and boats if not wiped down quick!
I think I read somewhere NOT to use regular wax for some reason, but I want to apply some kind of product...
We have the Broadcast for the boat board and I use a Ronix Koal 5.0. The Koal has a real glossy finish and I want to keep it that way!
Any suggestions!?2004 Outback Blue on White *Sold
2008 LSV Blue on White
EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
Krypt KMA4200 EQ under driver's side dash to control all the madness
Z5 Cargo Rack annnnnnnd She's NEKKKKED....
I'm no expert, I just read up on the Moomba Forum...
08-01-2013, 05:12 PM #2
I honestly use Babe Boat Bling on the boards with a gloss finish, same as on the boats.
For my custom boards, Soulcraft and Doomswell, i just use hot water and car wash soap.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >