Results 1 to 4 of 4
Thread: Blower motor help
-
07-21-2013, 08:41 PM #1Junior Member
- Join Date
- Aug 2012
- Posts
- 2
Blower motor help
Got a 02 outback, blower motor went out in. Pulled the back cover an it's got 2 vent hoses but only 1 motor. Is that right or does it need 2 motors? Bought the boat used so didn't know if it needed another. Also how far up the floor should the vent hoses go? 1 with the motor attached goes under floor, there's a PVC pipe there but it's not attached to the flex pipe should it be? The other flex line just vents in the rear compartment, is this the way it's suppose to be? Anyone know?
-
07-21-2013, 08:44 PM #2Senior Member
- Join Date
- Dec 2006
- Location
- Tuscaloosa, Alabama
- Posts
- 815
You will only have one motor. The rest are just vent hoses
Jack Beams
'05 Outback DD
325HP EFI Indmar
-
07-22-2013, 09:14 AM #3Junior Member
- Join Date
- Aug 2012
- Posts
- 2
Does the vent hose need to run up to the engine area? From the blower mine just goes to floor and stops, there's a PVC pipe there that goes to engine area that looks like flex hose should be attached to, but its not.
-
07-22-2013, 09:29 AM #4
your blower motor should be attached with a slinky looking black hose that should be attached to the vent
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart