Results 11 to 20 of 22
-
05-20-2014, 09:32 PM #11Member
- Join Date
- Feb 2014
- Location
- Martinsville, Indiana
- Posts
- 35
From what I have found the Monster racks fit the larger diameter towers. I would need a pretty big rubber shim to make them work. The pic of the OBV above looks like it has the roswell racks. Those are rediculously expensive unless someone has a used set. I must have mentioned I am not made of money. Ha!
First Moomba!
2009 Outback V 325
-
05-22-2014, 11:41 AM #12
I will post my swivel racks in classifieds. don't want to hijack this thread.
But, i think the bracket is about 2.5" and better fits the larger diameter tower. they may have shims that would reduce to the smaller diameter.19 Mondo
08 LSV, forever loved
-
05-22-2014, 12:11 PM #13
Have a look see here. I have an '08 so I used 1/8" rubber shims to make mine fit. 2 years later they are still solid as a rock. + bonus Newty shot
Newty on the boat.jpg'08 Mobius LS. Sold
'18 Craz "TypeO"
REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's
-
05-22-2014, 12:23 PM #14Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Swivel Racks on a Rad A Cage Tower
Yep,
I had the smaller diameter on my 02 but they don't fit my new 06 tower.. I'll take the 2.5, those are the blem units from monster..
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-22-2014, 02:33 PM #15
Yes they are. They work really well though. Look pretty darn good too.
'08 Mobius LS. Sold
'18 Craz "TypeO"
REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's
-
05-22-2014, 02:44 PM #16Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Swivel Racks on a Rad A Cage Tower
The paint was fading on mine after 1 season...
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-22-2014, 03:44 PM #17Member
- Join Date
- Feb 2014
- Location
- Martinsville, Indiana
- Posts
- 35
Is everyone in agreement that 1 5/8" to 2 1/5" is too much of a difference? Also, back to original question...anyone know of any that are a good value?
First Moomba!
2009 Outback V 325
-
05-22-2014, 04:00 PM #18Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Swivel Racks on a Rad A Cage Tower
It all depends on the shim, with mine I had one just right, the other moved all the time. Those were the smaller ones, you'd have to experiment and see if it works. If you don't take them I will since they're 2.5.
Sent from my Nexus 5 using Tapatalkhttp://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
05-22-2014, 05:47 PM #19
I posted my swivel racks in classifieds.
19 Mondo
08 LSV, forever loved
-
05-22-2014, 10:29 PM #20Member
- Join Date
- Feb 2014
- Location
- Martinsville, Indiana
- Posts
- 35
parrothd go ahead bud. I just wish there was something out there a little closer to the correct size. Looks like I can hit it right on if I spend 300/rack.
First Moomba!
2009 Outback V 325