Results 1 to 4 of 4
-
07-13-2013, 01:54 PM #1Junior Member
- Join Date
- Apr 2004
- Location
- Jax, FL
- Posts
- 7
Wiring for high press fuel pump 2000 Moomba Mobius V
Having trouble installing the new retrofit hp fuel pump. Does anyone have a correct wiring diagram?
-
07-30-2013, 05:24 PM #2
Going to be a tough one to find on a boat this old...
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
07-30-2013, 10:47 PM #3
Re: Wiring for high press fuel pump 2000 Moomba Mobius V
I've got a couple more of those don't help. Need to know what type of ignition you've got to narrow it down. Leaving tomorrow around 2 for a little boat vacation myself, book is staying at the house for good luck...
Hope it helps.
Sent from my S3 using Tapatalk 22008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!
-
07-31-2013, 10:17 AM #4
Great stuff! Where did you get this?
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!