Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Mar 2012
    Location
    Ogdensburgh,NY
    Posts
    43

    Default pictures of reinforced locker walls please

    Ok, I have searched the forums and I understand the importance of reinforcing the locker walls for the 1100lb bags....however i just can't seem to upload the pictures.....I am a visual guy can someone send some pictures for me of the finished product.....
    thx
    2013 not a Moomba

  2. #2
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  3. #3
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    7,692

    Default

    I did mine like daze, attached to the door, but instead of doing 4 vertical brackets , I did two "vee" shaped to cover the door with less aluminum.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #4
    Join Date
    Apr 2011
    Location
    NY
    Posts
    487

    Default

    Here is mine: IMG_0641[1].jpg
    '06 Outback - Gone but not forgotten
    '13 Mojo

  5. #5
    Join Date
    Mar 2012
    Location
    Ogdensburgh,NY
    Posts
    43

    Default

    I am not very mechanically inclined and it freaks me out drilling holes anywhere near the bottom of the boat...so when i put the bottom bracket on i use 1 inch screws and I will have no problem? do i need to put the bottom bracket o or can i just reinforce wall?
    thx for pics its greatly appreciated!
    2013 not a Moomba

  6. #6
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default




    I ended up removing that hinge in the middle and using a L bracket on the motor side so it doesnt push in.

    Its hard enough to work in the motor well so i elected to mount something on the doors and not the aluminum motor frame

  7. #7
    Join Date
    Mar 2012
    Location
    Ogdensburgh,NY
    Posts
    43

    Default

    great thanks....do you remember what size screws you went with to mount the l bracket? 1 inch?
    thx
    2013 not a Moomba

  8. #8
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    872

    Default

    Quote Originally Posted by Brayden View Post
    great thanks....do you remember what size screws you went with to mount the l bracket? 1 inch?
    thx
    i think 1 inch. I pulled one out of the existing hinge on the floor and used the same

  9. #9
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default pictures of reinforced locker walls please

    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  10. #10
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,600

    Default pictures of reinforced locker walls please

    Haven't done mine yet and quite frankly I haven't seen the need to yet either...
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •