Results 1 to 3 of 3
-
01-27-2006, 12:01 AM #1Senior Member
- Join Date
- Sep 2005
- Location
- Austin, Tejas
- Posts
- 491
adding on to factory ballast system
I have an 05 Outback with the factory ballast underneath the rear seat. I want to put a bigger sac in place of that one and put 2 200lb sacs under the seats in the bow. The problem is I want to tie them into the factory system but I need a diagram of it. I don't know what hoses go where and where I can tee them to the new sacs. Does the factory pump run in reverse to empty them, or do I have 2 pumps? and for the overflow, does that just work off of pressure?
Any help would be appreciated.
Thanks
-
01-27-2006, 09:07 AM #2Senior Member
- Join Date
- Aug 2002
- Location
- Bismarck, NorthDakota
- Posts
- 579
Replying to Topic 'adding on to factory ballast system'
Run a search for ballast. there have been many topics covering the issue.
Bruce Fuerstenberg
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting...holy shit!...what a ride!
-
01-27-2006, 05:25 PM #3
Replying to Topic 'adding on to factory ballast system'
Do you have just the one bag system now?
Similar Threads
-
Adding Ballast to Mobius LS
By AZ_Calling in forum Wakeboarding | WakeskatingReplies: 8Last Post: 10-05-2013, 11:33 PM -
Adding Ballast to boat that doesnt have it
By Rugburn in forum General ChatReplies: 9Last Post: 09-07-2007, 01:00 PM -
Adding factory-style ballast to center ski locker?
By iaonbb in forum General ChatReplies: 8Last Post: 11-22-2006, 02:37 PM -
Adding a Ballast System in Ski Locker
By AZ_Calling in forum General ChatReplies: 1Last Post: 10-21-2005, 09:40 AM -
Adding ballast to LSV
By OnTheH20 in forum General ChatReplies: 3Last Post: 07-19-2005, 10:34 AM