Results 1 to 3 of 3
Thread: Flow Rite Elbow Size
-
06-16-2013, 05:10 PM #1
Flow Rite Elbow Size
My Flow rite elbow had a piece that broke off, so I bought a new one from wakemakers.
http://www.wakemakers.com/fly-high-p...ting-w746.html
My problem I have is that not all of the water makes it into the sac and some of it leaks. I don't know if theres a difference between the 1 inch and 1 1/8 they have listed, but it doesn't look i can order one or the other2016 Mojo
2010 Moomba LSV-Sold
-
06-16-2013, 05:59 PM #2
Flow-Rite only makes the 1.125" that you purchased and a .75". The 1.125" mates with the 1" Fly High W743 and the .75" Flow-Rite mates with the .75" Fly High W736. There is no mistaking these fittings as they will not cross mate. I would inspect to make sure the o-ring is still intact on male portion of the sac fitting.
-
06-16-2013, 07:00 PM #3
Good call no o ring
2016 Mojo
2010 Moomba LSV-Sold