Results 1 to 8 of 8
Thread: Fat sac help...
Threaded View
-
06-03-2013, 09:32 PM #1
Fat sac help...
So my parts came in to make my factory 400lb rear bags into throw around the boat bags. I was plannin on using one for where I removed the cooler and one on the floor in the bow. I finally got time to get out on the water for some surfing today and tried unscrewing the factory caps off to put the tsunami pump connector caps on, but apparently I was too weak. I then tossed the bag over to my buddy who was also to weak. We got to looking at these caps and it looks like somebody applied a little locktite or some rubber cement around the threads to keep is from coming undone.... I was shocked!! Soooo how do I break this stuff free so I can use these bags as planned. I don't really wanna buy any more bags... HELP!!! And we definitely need weight upfront cuz I couldn't let go of the rope while surfing with just the 1100 in the surf side...
2004 Outback Blue on White *Sold
2008 LSV Blue on White
EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
Krypt KMA4200 EQ under driver's side dash to control all the madness
Z5 Cargo Rack annnnnnnd She's NEKKKKED....
I'm no expert, I just read up on the Moomba Forum...