Results 1 to 7 of 7

Thread: Tower parts

  1. #1

    Default Tower parts

    I have a 09 lsv, I need the rubber gaskets that go in between where the tower bolts to the boat. Can someone point me to where I can buy them. Thanks

    Sent from my SCH-I545 using Tapatalk 4 Beta
    2009 moomba Mobius lsv

  2. #2
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by kregstrong View Post
    I have a 09 lsv, I need the rubber gaskets that go in between where the tower bolts to the boat. Can someone point me to where I can buy them. Thanks

    Sent from my SCH-I545 using Tapatalk 4 Beta
    Never heard of you being able to buy them, even the dealer just cuts them to order.

    You best bet is goto Agenda Surf

    http://agendasurf.com/dir/products/b...-set-grey.html

    You can also get Gator grip at Home Depot, i even used a rubber car floor mat for my 08 LSV,

    Remove the old traction pad, use it as a template and cut your self a new one and install it.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  3. #3
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    788

    Default Tower parts

    I did this same thing last week. I just used the old (factory) swim step pad that was left over from my seadek install a few years ago. It worked great! As mike says, use the old one as a template.
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  4. #4
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    I ordered mine from Atlanta Marine. They were adhesive on one side but still didn't stay in place very well. I will make my own next time and probably epoxy them to the tower base.

  5. #5
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,368

    Default

    I bought some for my dealer for like 15 bucks. Lasted about a season and now there are all squashed out haha.
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  6. #6
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by rdlangston13 View Post
    I bought some for my dealer for like 15 bucks. Lasted about a season and now there are all squashed out haha.
    I have to say i was impressed wit the ones i made,

    I used a Dodge truck floor mat and they held up real nice < poke poke >
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  7. #7

    Default Re: Tower parts

    Thanks for the replies. I will probly do the same, just cut up some old floor mats or something like that.

    Sent from my SCH-I545 using Tapatalk 4 Beta
    2009 moomba Mobius lsv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •