Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by smorris7 View Post
    Money sent. Any feedback on instalation would be great. I can see and feel the cutouts behind the vinyl. What is the best way to cut the vinyl. Did they factory prewire the bow?
    I think it might have been Ian but im not postive. Did an install on his friends LSV perhaps and did a front speaker addidition.

    The hardest part is cutting the fabric so you can fold it back and make it look clean when you add the speakers. No i dont think the facotry adds the wires, but thats the easy part honestly.

    The cut outs should be there, the factory isnt going to use two different panels such as that for speaker and no speaker options. They would only do the additional fabric cut out and mounting the speaker per the option.

    Found the thread, post 35 I'd pm Ian Ashton see what his thoughts are.

    https://forum.moomba.com/showthread....ghlight=stereo
    Last edited by mmandley; 06-01-2013 at 11:28 AM.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  2. #12
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default Factory Kicker In-boat Speakers

    Yes, bow is Pre-wired, but not connected to the headunit - unsure if factory amp is wired (both boats I've done didn't have factory amps).

    Best way to cut the vinyl - feel for the center of the hole, then go to one edge and cross cut, then go 90 degrees in the other direction, basically making an X.

    The hardest part is that the factory wires are really short, so you have to be careful to make sure they stay connected, or extend them.

    Before;


    After;
    2013 Outback V

  3. #13
    Join Date
    Feb 2011
    Location
    Monroe, WA
    Posts
    75

    Default

    Hmm I could use the other two, I've got a couple that are busted in my boat. Shipping to 98272 (WA)?
    2008 Mobius XLV | 325HP | Acme 1235| lots of ballast!

  4. #14
    Join Date
    May 2013
    Location
    Utah
    Posts
    9

    Default

    I could take the other two. I have one blown one in the bow of my Mobius, but the tweeter still works. The shields over the speaker on these look beefier than mine too. My current ones are broken. Shipping to Utah (84094).
    Boat Macgyver in training.

    2008 Mobius LSV "Blue Steel"

  5. #15
    Join Date
    Feb 2011
    Location
    Monroe, WA
    Posts
    75

    Default

    muehlcj, your inbox is full dude
    2008 Mobius XLV | 325HP | Acme 1235| lots of ballast!

  6. #16
    Join Date
    Apr 2011
    Location
    NY
    Posts
    487

    Default

    Quote Originally Posted by xBabyJesus View Post
    muehlcj, your inbox is full dude
    Sorry. I cleaned it out.
    '06 Outback - Gone but not forgotten
    '13 Mojo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •