Results 1 to 7 of 7
Thread: Depth finder 09 lsv
-
05-25-2013, 09:35 AM #1
Depth finder 09 lsv
Quick question. How does the depth finder determine the depth because it said 2.5 ft and I know I'm in at least 4-5 foot of water, is that from the bottom of the boat or how does it come to that?
Sent from my SCH-I545 using Tapatalk 22009 moomba Mobius lsv
-
05-25-2013, 10:12 AM #2
Depth finder 09 lsv
It should read the depth from the transducer mount location. Most units have a calibration feature if the reading is not what you want.
2018 Max with a little extra weight here and there
-
05-25-2013, 10:57 AM #3Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-25-2013, 11:28 AM #4
Sorry to hijack but what if it only reads this. ( -- ) its my 2012 , is the sensor no good or does something need to be done to get it to work
2012 Mobius LSV
05 Outback LS SOLD
-
05-25-2013, 12:39 PM #5Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-25-2013, 04:26 PM #6
someone cut the wires to mine haha
2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Exile XM7's
Exile Harpoon
Exile ZLD
Polk 10in sub (2)
Polk P330 amp (subs)
-
05-25-2013, 06:28 PM #7
Ok well im going to check all the conection and see if the sensor is still glued to the bottom of the boat .
2012 Mobius LSV
05 Outback LS SOLD