Results 1 to 6 of 6
Thread: New Vinyl/Logo
-
05-21-2013, 03:05 PM #1
New Vinyl/Logo
my vinyl logo on the side of my boat is all ripped up from mooring the boat last year and rubbing on the dock after a storm. If i stripped it all myself what would the dealer charge to replace the vinyl with the new design?
2006 Mobius LSV
-
05-21-2013, 03:12 PM #2
New Vinyl/Logo
Contact your dealer but I believe the blurfx graphic is around 400.00 plus whatever there specific labor rate is.
Sent from my iPhone using TapatalkTodd
2017 SUPRA SA450
-
05-21-2013, 03:53 PM #3Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
Seems like a vinyl graphics company will be able to make something custom and install it cheaper than a boat dealership.
1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
-
05-21-2013, 04:40 PM #4
how would i go about doing that, i see there are some places around here that say they do vinyl, stickers, shirts etc, but i dont think they do any installing....
2006 Mobius LSV
-
05-21-2013, 05:24 PM #5
New Vinyl/Logo
Looking at what our diecut stickers cost, The blurfx graphic has so many little cuts that have to be done I think it would cost a ton to have a vinyl shop do a one off piece. Not to mention having them convert the artwork. There was a thread a while back "2013 LSV graphics". Some pretty good info there too.
Sent from my iPhone using TapatalkTodd
2017 SUPRA SA450
-
05-21-2013, 09:17 PM #6Senior Member
- Join Date
- Jan 2008
- Location
- Pensacola, FL
- Posts
- 1,585
When you said "have the dealer replace it with a new design", I thought you meant custom design. The dealer would send that out to a shop and charge you for it. I was trying to cut out the middle man.
If you mean a different Moomba design, that is different1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier