![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Looks like I have water in the second to last cross member in the trailer right below the lights. Not the rear member, the v cross member right behind the axle.
i saw some rust on the trailer around the light and thought it was strange , so I tried to clean it up and realized when I moved the light slightly rusty water would come out. So I pulled the light with the rubber gasket and about a half gallon of rusty water came out. It's been in my back field for a week now.
Not sure how it got trapped in there, when I examined the wires , the protectective coating is stripped on one side from being pulled through the trailer. Not good if sitting in water for long periods of time.
any thoughtson how this should drain or not fill up.
![]()
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
I had a similar problem with mine when I redid my trailer. I was having water come in through the lights and water was sitting on the top of the rail in that bowl area. I filled my part in with a flat piece of steel to keep that from rusting and just drilled a drain hole in the very bottom.
2004 Mobius LSV
2004 Mobius LSV
Call me crazy but I believe all my cross bars have a hole drilled at the lowest point of the arch for drainage.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
No hole, boatmate said they would warranty the work, drill new hole, etc and replace the frayed wires in the fall when I bring it back to the dealer.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
Decent resolution, but stinks regardless.
I noticed on a '13 trailer there are holes drilled in the lower arch of the axles