Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default 08 LSV Mods w/ links to everything

    Aight guys, here goes... I tried to keep tabs on all the links to products I used and to the links of other threads with good info on each topic!!

    I'll start with the removal of the factory decals!
    All I used was a hair dryer and my fingernail. Boat was stored out side for 4 years and the side that never saw the sun came off no problem and left no discoloration. The other side saw the sunrise every morning and the decal was sun dried to the boat pretty good. I used everything I could find with no luck and I didn't want to wait on ordering a 3M Adhesive Eraser Wheel (which would've saved me 3 hours), but it all finally came off with persistence. Afterwards, gave her 2 Compound buffs and 1 good coat of wax!
    BEFORE
    http://i224.photobucket.com/albums/d...ps96478a61.jpg
    AFTER
    http://i224.photobucket.com/albums/d...psf1ca0c3f.jpg
    http://i224.photobucket.com/albums/d...ps44410b4d.jpg
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  2. #2
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default

    While waiting on the boat to get here I had already done some researching on here for a few things that I knew I would need.
    1) Ballast Upgrade
    Got 2 of these with the 1100lb bags, then picked up parts 33030 and 33049 to use on the factory 400lb bags
    http://www.wakemakers.com/supra-and-...r-upgrade.html
    http://www.wakemakers.com/catalogsearch/result/?q=33049
    http://www.wakemakers.com/catalogsearch/result/?q=33030
    2) Board Racks
    http://shop.monstertower.com/p-141-p...inventory.aspx
    These are a little big for our towers but with a small rubber shim to fill the gap, PERFECT (can't beat the price)
    https://forum.moomba.com/showthread....wer-racks-pics
    3) Cooler Removal was EASY with a dremel and dremel tool 561! Be sure to lay down a garbage bag or something to save a nasty clean up of fiberglass shavings. Have a partner hold a shop vac close to you while cutting and it will help tremendously!
    http://www.homedepot.com/p/Dremel-1-...4#.UX8gJ8pNUmU
    http://i224.photobucket.com/albums/d...ps4c97ec0a.jpg
    http://i224.photobucket.com/albums/d...psaf3c954d.jpg
    http://i224.photobucket.com/albums/d...ps02fa5298.jpg
    Last edited by tgoody14; 04-29-2013 at 09:51 PM.
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  3. #3
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default

    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  4. #4
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default

    Now for the LEDs...
    In case anybody else wanted to change out their dash lights... I used the same lights on my 2004 Outback and they worked on the 08 LSV... FYI prepare to twist/torque/cram your upper body in the craziest ways to get up under that dash with a pair of pliers haha
    WLED-x6: 194 LED Bulb - 6 LED Wedge Base WLED-B6: Blue
    http://www.superbrightleds.com/morei...edge-base/200/
    http://i224.photobucket.com/albums/d...ps6ba15ca1.jpg

    I went with the cup holder LEDs from Ozinum
    12 x Prewired Superflux 4 Chip LEDs - Blue
    http://www.oznium.com/prewired-superflux
    Then I went with 5 x Flexible LED Strips - Blue, 9.5 Inch from Ozinum
    http://www.oznium.com/led-flex-strips
    The lights may not look too bright due to all the outside light coming in from the boat stall doors not being completely shut. I have LEDs in all the cup holders except under the driver's dash because I have a strip there and one under the captain's chair facing back across the open area to the other side of the boat. I also put a strip in the glove box and inside the Observer's seat back, which helps when getting stuff out of the boat at night.
    http://i224.photobucket.com/albums/d...ps9bc58326.jpg
    http://i224.photobucket.com/albums/d...ps2fecbad2.jpg
    http://i224.photobucket.com/albums/d...ps1705633e.jpg
    http://i224.photobucket.com/albums/d...ps0075e735.jpg
    http://i224.photobucket.com/albums/d...pse3d201af.jpg
    http://i224.photobucket.com/albums/d...ps8635e70a.jpg

    Link to 04 Outback lights:
    https://forum.moomba.com/showthread....ghlight=lights
    Last edited by tgoody14; 04-29-2013 at 10:13 PM.
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  5. #5
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default

    I'm still waiting on my ACME 1617 prop to get here and I'll be almost done!!! yeaaa right.. haha

    I have a couple extra cup holder lights that I was going to put in place of the courtesy lights, but I couldn't really figure out how to get that little cover off and I didn't want to break it... Is there a trick to replacing those bulbs??? The inside is covered with carpet so I assume the cover comes off from the outside, but It seemed to be pretty sealed to me and didn't want to just POP off....
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  6. #6
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default

    Posts by members with good info...
    I never found Moombadaze's cooler removal thread, but here's a couple...
    https://forum.moomba.com/showthread....cooler+removal

    Lots of info here:
    https://forum.moomba.com/showthread....t=full+upgrade
    And here:
    https://forum.moomba.com/showthread....oombadaze+mods
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  7. #7
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,456

    Default

    Wow - nice work all around. I guess I'm going to have step up my game with the impending rebuild and photographic proof...

    I can't cut out my cooler though - there's too much beer in it most of the time.
    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

  8. #8
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    6,377

    Default

    looking good, really like the neked look, now i wish i had done that a couple years back.

    hope the monster racks work good for ya.
    Hey, Its Moomba time

    Its all about the dash - enjoy the dash, as that is your time between the dates
    13 Mobius LSV-sold
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  9. #9
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    636

    Default 08 LSV Mods w/ links to everything

    Berg - thanks and when we go out there's about 6-8 of us every trip so we would probably have a better result just turning the opposite surf side into a massive cooler instead!!!! (Now there's an idea) 😎

    Moombadaze - yea I really think taking the decals off definitely makes the boat look bigger, plus cleaner!
    And yea I was so busy looking at the diameter of the braces that I didn't even notice racks were wakeboard/surfboard (thick one) rather than wakeboard/wakeboard! That's all the reason I needed to start looking for a nicer, thicker style surfboard.... 😜
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  10. #10
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    1,131

    Default Re: 08 LSV Mods w/ links to everything

    Tgoody - Contacted Monster, and they were no help. I see that the forks mount to an oval bar. Is that bar the same size and dimension of the oval crossbar on your tower? I was thinking about buying the racks just for the forks.

    Thanks

    Sent from my Droid Charge using Tapatalk 2
    Joe

    2014 LSV
    2010 Outback V - Sold
    1993 Echelon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •